For the most part my prices do include shipping via USPS.

-----------------------------------------------------------------

Up first is the rainmaker. I hate to say it but I am not sure of the price just yet, I wont be asking much for it. Just need to check some papers before I can list a price.





------------------

Up next is a diadem which has been babied and well taken care of. I would really like to squeeze 225 out of this but I am negotiable on it.





DIADEM manual

------------------

UP next is the Y framed RT valved mag. I would like 180 for this package.





----------------

Time for some barrels.
In order of appearance I have an AGD thunderpig, a spyder style barrel, a cruddy homeported WGP barrel that came to me over ebay and a J&J barrel in A5, pro/lite, CVX, procarbine, F/A, and I think phenom thread style.

I would like 20 for the Tpig, 15 for the spyder barrel, 20 for the J&J.



I will toss in a barrel for free if you buy a compliant gun.

------------------

I also have a AM pre production body, I am not sure if it works with anything but I can tell you that it has no serial numbers and its the last that I can find, id like 15 for this.





-------------------

Here is my PF body, once it was part of a warpfeed setup and could be easily reconfigured if desired. I would like 50 for this body.





The stickers can be removed if desired.

-----------------

Next up is an oddball of a AGD valve. These were labeled as FIELD RENTAL, The difference was that while it was still a lvl 7 it couldnt exceed 280 FPS making it ideal for rental setups. I would like to get 70 out of it.



-------------------

Next up is my dirty little secret, my shocker 4x4. Honestly It hasnt had much use as far as I can tell. The body and barrel are in very good condition the only real detractor is some marring on the knurling. I do have the mode lockout cap and an original SP remote line, I would like 90 out of this. As far as the gun goes it does have semi, burst and full auto. I ran the gun with my PE 4500 850 PSI output rather consistently. I have also made a 9v adaptor that I will be including.







I tried to get a good pic but I kept leaving smudges.

A word on safety, The shockers of this era had no on/off switch so it would be best to leave it in semi and a barrel bag on it when in the safe zones, Unplug the battery when you are done for the day.

---------------------

Up next is a set of ATCI pumps, Neither of them work and I doubt that parts from both could make a single working gun. I am listing them low to reflect this.
I would like 25 for the pair.





---------------------

Up next is an older autococker. As I recall I ran this thing unregged, as such it would make a great start for an SC sniper, I would like 85 for it.

---------------------

Next is a small selection of pod packs. I want 20 for any of them 35 for all of them or 10 bucks a pack if you are buying something else. Each pack comes with pods. The pods in the reds pack are dye lock lids.







---------------------

Here is a functional rain cover, It fits 1" OD barrels. I would like $35 for it. There is a small chunk missing from the tip but it does not affect performance.





----------------------

New DYE Xcel barrel setup for older WDP threads. I would like 15 bucks for it.



--------------------

Here is the body I used for my SC sniper setup. I have removed the feedneck, drilled, and tapped a hole for a CCI feedneck to be bolted directly on. I am including the trigger frame which is very smooth and has many points of adjustment. I would like 70 dollars for it.





-----------------------

Here is an AKA tornado valve for pre2k bodies, I would like 45 for it.



-------------------------

Here is a lightning bolt, it fits pre 2k setups. I would like 35 for it. Not shown is the AKA crosspin that will be included.



------------------

Here is my eggy loader, I really dont know what gen it is but I believe it to be a gen 2 The battery door is missing, I would like to get 30 for it.



------------------

Here is a few edge backs that have been cut for a 2k blazer. There is a small fit issue, I am making the price low to reflect the issue. The issue can be fit by most machinists or lathe operators.

The included sizes are .688 .691 and .693



-----------------

Cocker LPR line, If you need some let me know and ill toss a few feet in with your order.



-----------------------

Here is my ghetto shark I swear this gun is one of the most rewarding guns to make eliminations with. I have a home made SC feed I will include with it if I can find it before it ships. I would like 30 out of it. One thing I would like to pass along is that the sharks are incredibly accurate. I nearly forgot to mention that I am including a TASO barrel along with the stock barrel.



-----------------------

Here is an intellifeed loader, I am not sure if it can be converted back to sensor activated. I would like 25 for this odd ball.





--------------------

Next up is another set of barrels, Both here are cocker threaded. The stiffi barrel is .687. I would like 50 for the stiffi barrel and 25 for the SP teardrop/progressive barrel.



----------------------

Next up is a pair of wsp stickfeeds. One is missing its PF plug. I am not sure if they are WSP or another brand. I would like 20 for the pair.



---------------------------

My Goblin Solo has got to go. I would like 95 for the full set.

Included is the Oring set, valve filler, holster, "launcher'/gun, and 11 shells.



--------------------------

SP maxflo the body definitly has some wear on it, I would like 25 for the reg.



-------------------------

Pump mag, I think most people would be hard pressed to find a gun that operates smoother. I would like 350 for this gun, As for now I need to mark it as on hold. I will be including the ULE body, matching AGD feedneck, and an AM illusion feedneck. The barrel shown will be included as well.





--------------------

Here is some more Misc stuff.

A PGP feedtube and a properly fitting DYE SS 2k blazer barrel, the Dye SS is easily one of the nicest shooting barrels I ever had for my blazer. I will include the PGP feedtube for free with any other order or for 15 bucks separately. I would like 30 for the dye barrel.



---------------------

Here is a small assortment of pump handles.
I would like 15 for the new CCI mini handle, 35 for the 2k+ WGP kit and 10 for the sheridan PGP, I will also include the PGP with any other purchase for 5 bucks.



----------------------

Next up is my KP2, This one has been converted from a KP3 as such it has a patch on the old feed. All work is very good quality. As you can see it has some other customization as well, There is a fassst changer, velocity adjuster, custom pump handle, 17 round feed, PPS feedtube cap. I would like 425 for the package.





Included is a CA adapter, tank bracket, and speedbolt.

The KP2 was originally a KP2 someone converted to DF, I then coonverted it back to side tube stock feed. That's chea for such a nice KP, should sell fast, if not, list it on MCB and it won't last long. Good luck with the sales, there is some nice pieces there.

pmed you

PM sent buddy.

Now accepting paypal.

Alrighty... I have to take this stuff to ebay soon. If you really want it please pick it up asap.

On MCB now, moving the remaining items to Ebay by friday.

MAN I wish I had the money for that Mag pump!!! Ugh. Beautiful!