By: 'alan'

i have just got a set of 40s but i can not fit them as my brake servo is to big can someone help,i was told that an escort servo is smaller and this will fit better and let me fit my 40s the servo at the moment has four brake pipes off of it,one to the back of the car,two to the front,and one not used.can someone please help

By: 'Alan'

sorry i mean master cylinder,the car is a phaeton s2 and i have a 1600x/flow

By: 'Paul (doc3218)'

Alan.
Do you really need a servo? my S2 has twin 40's and I have used a fiesta master cyl from a 998cc Y reg motor (non servo) and the reservoir just clears the air filters.
I also used all the outlets to give me dual line braking throughout the car,
There are several sizes of inlet manifold available. ie depth, whether that would also help?

By: 'andy(doc3781)'

Now I am sure that someone can help - Unfortunately I could offer help on the S3 as my x-flow with 40,s needed the Escort mk1 pedal box relocated lower to miss the 40's ( helps with pedal position in the ****pit)and the engine raised in the chassis 1.5" helps with sump clearance.

I may be able to assist in a few weeks after I have helped Sean put a tuned x-flow with webers in his S2.

Still may give food for thought.

Andrew